ALSO. logo
ALSO. logo

All articles

My TM-B makes noise when I rideUpdated a day ago

Applies to: All TM-B bikes


What you may notice

Humming, vibration, or other drivetrain sounds at certain speeds and assist levels, especially while coasting on a new bike.


Why this happens

Powertrain sounds. The TM-B has an integrated powertrain with a high-torque traction motor and a generator that harvests energy as you pedal. This design produces distinct sounds during acceleration and pedaling that differ from lower-powered e-bikes. Some mechanical sound is normal.

Carbon belt break-in. The TM-B uses a Gates Carbon Belt Drive, so there's no chain to maintain. The system runs at significantly higher tension than typical belt-driven bikes, so a brand-new belt can cause a distinct vibration or hum, especially when coasting.

The belt needs a break-in period of roughly 100 to 200 miles, depending on terrain and riding style, to settle into the front sprocket and rear cog. These sounds soften as the belt seats.


When to contact support

You don't need to wait until 100 miles. Contact us right away if a sound or vibration:

  • Affects your riding comfort
  • Feels unusually loud or harsh
  • Worries you


How to contact support

Email [email protected] and include:

  1. Your bike serial number
  2. Your approximate current mileage
  3. A short description of exactly when the noise occurs
  4. If possible, a short video with clear audio, recorded from a safe, stationary position. This is the fastest way for our team to check whether your powertrain is running normally.
Was this article helpful?