Troubleshooting
Find fixes for the most common issues here - TM-B.
Categories
Articles
Hard Reset
To perform a full power cycle of the TM-B, hold the button down on the bottom of the down tube, under the speaker grill. Press for about 15 seconds or until the display shuts off. This will power down the bike and its computer. Then, hold the button
Display Not Responding
Display is frozen, but still on If the screen is lit but won't respond to touch, or it's stuck on one image, there are two things to check:. Rule out a low batteryLow voltage can cause software errors. Plug a charger into the USB-C port on the downtu
Anti-theft features: what's available now vs what's coming
Applies to: All TM-B bikes. Tip: Sleep Mode keeps lock and GPS tracking active while parked. See Battery drains while my TM-B is parked before fully powering off a bike you want to keep trackable.
My TM-B makes noise when I ride
Applies to: All TM-B bikes. Humming, vibration, or other drivetrain sounds at certain speeds and assist levels, especially while coasting on a new bike. Powertrain sounds. The TM-B has an integrated powertrain with a high-torque traction motor and a